Rotary extrusion Ice Maker(Flake/Nugget) YIM-JJ045

Standard Features

◉All 304 stainless steel shell, food grade PE ice storage bucket;

◉50KG ice storage space;

◉Large area heat dissipation hole design, high heat dissipation efficiency;

◉Hidden handle design, beautiful appearance;

◉The power switch is equipped with a protective cover to prevent the equipment from stopping due to collision during operation;

◉Cyclopentane foaming material is used to thicken the foaming layer and the thermal insulation performance is better

◉R1/2 thread connection water inlet is reserved and a 1.5-meter water inlet pipe is provided;

◉AD25 drain port is reserved and a 1.75m drain pipe is also provided;

◉The device comes with a 1.75-meter power cord, which can be directly connected to the electricity, pay attention to reserve a socket at the installation position;

Function

◉Built-in evaporator, fully enclosed refrigeration system, long service life;

◉Adopt high-efficiency refrigeration system to increase the production capacity of the whole machine by over 10%

◉Adopt special noise reduction technology to reduce working noise by 13%

◉Adopting the principle of rotating squeeze ice making, quickly produce ice; save water and electricity, the cost of ice making is equivalent to 65% of cube ice

◉Using R404A refrigerant, more environmentally friendly;

◉The equipment has a one-key cleaning function;

◉The equipment has full water protection function;

◉The equipment has a water shortage protection function;

◉The equipment has compressor high pressure protection function;

◉The equipment needs to be used in an environment of 1-43℃, the water pressure needs to be controlled between 0.5-8bar, the ambient temperature is 20℃ and the water temperature is 15℃,the daily ice output can reach 160KG, the ambient temperature is 32℃ and the water temperature is 20℃, the daily ice output can reach 126KG;

Optional Features

◉3cm、6cm、10cm、15cm High foot

◉water softener